
Confors Marine Plywood is the 'just perfect ply' for the rough & changing Indian atmospheric condition. It is passed through vacuum Pressure impregnation for permanent preservative treatment to protect against attack by borers, termites and other micro-organisms. It is best suited for those who live in humid weather, seashores or fluctuating atmospheric conditions. It is manufactured from selected and well peeled veneers. The layers are bonded at very high pressure that makes this ply kind of heavier plywood. A specially formulated phenolic resin of rich solid content conforming to standard of IS:848:1947 gives immense inner strength to this plywood. Very high shear strength and anti swelling characteristics of Confors Marine Plywood makes it unique in humid, rough and verstile weather conditions. It can resist boiling water upto 72 Hours.
Confors AEGL marine grade plywood is a genuine product suited for all the coastal areas or marine applications. Confors marine grade has an edge over products because of its in depth retention and AEGL technology. The higher density AEGL Confors marine plywood overcome all the adverse affects of sea shores and moist winds.
We wants only dealers and distributors inquiries.
Test | I.S.I. Requirement | Test on Confors |
Moisture Content | 50/0-150/0 | 7.0% |
Glue Shear Strength in Dry Condition | (i) Ind Min. 1078.7Nt | 1520 Nt |
Glue Shear strength after Wet Condition | (i) Ind min. 784.5 Nt | 1280 Nt |
Glue Shear strength in Mycological Test | (i) Ind IVIin. 784.5 Nt | 1200 Nt |
Tensile Strength | ||
(i) Parallel to grain direction | Min. 420 kgf. / cm2 | 660 kgf. / cm2 |
(ii) Right angle to grain direction | Min. 250 kgf. / cm2 | 395 kgf. / cm2 |
(iii) Sum of both directions | Min. 845 kgf. / cm2 | 1070 kgf. cm2 |